Zeppin ZR-T3002 XRay T3-11 Alloy steering link for side mount servo.

Black alloy with centre 3mm hole for ball joint. This gives perfect balanced steering from left to right.

For the Xray T3 2011 and 2012 chassis (dual bell crank which is standard on 2011 T3).

Note: You may need to space the ball joint up with spacer.

T3 2011 Information:

Allows you to rotate the servo 90degrees for added space for electrics on the '11 chassis. Very useful.

Some racers also say it improves handling.

To mount the servo you will use one of the servo posts.

You will need to drill a hole in the chassis for the post to line up the servo arm and link, so it is in line with the ball you screw into the centre of the new link.

Because the other side of the servo hangs over the chassis slightly, you cannot use the second post. Double sided tape is used instead. This provides a secure servo with one side still being post mounted to chassis.

The steering link is then connected to the centre of this link.

T3 2012 Information:

The 2012 steering rod as standard on the T3 2012 connects to one of the bell crank arms. This will allow the rod to be connected further forward for less sensitivity and to be more centralised.