SPEC.R SPR009-TA Tamiya TA-05 Gear diff 37T

Replacement gear diff for 37T diffs

16.5mm between bearing faces. May require a few thin shims (10mm hole) to take up end float

Requires oil. Only part fill or the diff will have too much drag

Lightly grease the paper sealing gasket with a thick type of grease to help it seal

Suggested oil is 1000cSt for rear diff. (500,000 for a front diff)

Uses standard 3.0mm blades

Steel outdrives

Weight is about 8gm more than standard diff

Note: After assembly , if gears are stiff, loosen the 4 screws. Recheck after running.