|
Novak NE3613 Ballistic 13.5 Brushless Motor
Novak's Ballistic Spec Brushless Motors 10.5T – 21.5T (#3610 - #3621) are completely rebuildable, right down to the hardware. In fact, only one motor is necessary to compete in all spec class races. Simply pick your class of choice, and install the necessary color-coded, hand-wound stator. Each stator includes a factory-installed insert that easily identifies the number of motor winds.
To complete the racing package, this next-generation spec motor series contains an easy-to-adjust timing assembly that alters the RPM range and retains previous user settings, allowing for strategic and smart spec racing. Additionally, these sleek motors are built to ROAR/IFMAR specifications, boast a removable shielded sensor harness, and contain a 12.3mm nickel-plated sintered Neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.
THE NOVAK STANDARD
Like all Novak brushless motors, the Ballistic Spec Brushless Motors are designed, tested and built at the Novak facility in Irvine, Calif. Each motor stator is hand-wound for maximum copper fill and individually tested under Novak’s strict parameters, including measuring the resistance of each coil to ensure the correct number of turns. The motors are also tuned to the same factory timing, run under a simulated load, dyno tested, and electronically weighed to ensure the best product is sent to customers.
| BALLISTIC SPEC BRUSHLESS MOTOR FEATURES |
 |
Sensor-based for excellent torque and low-speed driveability |
|
Oversized front bearing [1/2” x 3/16” (12.7 x 4.8mm)] for increased load handling and bearing life |
|
Rebuildable design with removable shielded sensor harness, rotor, sensor assembly, wound stator, bearing cap, hardware, sleeve and both end bells |
|
Nickel-plated, 12.3mm sintered Neodymium rotor with a 0.125” pinion shaft that accepts all existing pinion gears |
|
Meets RoHS compliance and includes 120-Day Warranty |
|
Designed, hand wound and dyno tested by Novak in Irvine, Calif., using globally sourced components |
|
| BALLISTIC SPEC BRUSHLESS MOTOR SPECS |
|
Ballistic Motors
|
10.5T
|
13.5T
|
17.5T
|
21.5T
|
|
Part Number
|
#3610
|
#3613
|
#3617
|
#3621
|
|
Color-Coded Stator
|
Blue
|
Orange
|
Yellow
|
Green
|
|
KV (unloaded)
|
4,200 RPM/Volt
|
3,300 RPM/VOLT
|
2,200 RPM/VOLT
|
1,800 RPM/VOLT
|
|
Watts
|
235
|
195
|
130
|
85
|
|
Maximum RPM
|
50,000
|
50,000
|
50,000
|
50,000
|
|
Sensor Harness
|
9" (230mm)
|
9" (230mm)
|
9" (230mm)
|
9" (230mm)
|
|
Motor Size
|
2.07" x 1.41" (52.6 x 35.8mm)
|
2.07" x 1.41" (52.6 x 35.8mm)
|
2.07" x 1.41" (52.6 x 35.8mm)
|
2.07" x 1.41" (52.6 x 35.8mm)
|
|
Motor Weight
|
6.6oz. (187.0g)
|
6.6oz. (187.0g)
|
6.6oz. (187.0g)
|
6.6oz. (187.0g)
|
|
Compatible Novak Speed Controls
|
GTBs, SLYDR, Havocs
|
|
|
|
|
| |
| |
|
|
