Features:

-Cooler operating temperature due to complete, light aluminium housing and special PCB design with extra-thick copper wires and optimized switching flanks. The flat design provides an extremely low centre of gravity.
-Top efficiency thanks to the new, even faster 16-bit processor and optimized software with newer, simpler operating software; providing longer operating time and greater performance
-For brushless motors (see operating voltage) and motors with brushes (up to 7.4V)
-Telemetry functions
-Automatic Hall sensor detection
-Storage/read-out of max rpms, maximum current, and temperature
-New brake and power programmes
-10 user-programmable modes
-User-updatable firmware
-Soldering socket for easy replacement of wires

Specification:

-Recommended motors: >= 9,5T (with 3,7V >=3.5T)
-Excess temperature protection:
-Weight incl. leads: 85 g
-Weight excl. leads : 50 g
-Cell count, Pb: 3 - 6
-R DS on der FETs bei 25°C: 0.0008 Ohm W
-BEC : 5,8 / kurzz. 4 V/A
-Pulse frequency : 0,25 / 0,5 / 1 / 2 / 4 / 8 / 16 / 32 kHz
-BEC max. power loss: 2,5 W
-Voltage drop @20 A: 0,017 V
-Continous current at 25 C: 75 A
-Cell count, LiPo, Lilo: 1-2-3
-Cell count NiCd, NiMH: 4 - 10
-Dimensions (LxWxH): 34 x 31 x 18 mm
-Operating voltage : 4,8 ... 12 (3,7V with rx)

Programmable functions:

-On/off function with button
-Low-voltage cutoff
-Automatically adjustable for Li-/Ni batteries on in 0.1-V steps
-Automatic brake, minimum brake, maximum brake, full brake, ABS braking function
-Maximum reverse; various reverse modes
-Automatic throttle
-Soft start, soft braking
-Current limiting, start-current limiting, turbo
-Transmitter lever positions: full throttle point, zero point, full braking point, zero point width
-Timing, variable timing functions
-16 power curves for 3T - 21.5T
-Settings for temperature shutoff, sensor mode, braking mode, motor type
-Frequency 0.25 - 32 kHz
-For other functions, see PC software!